Clic Model 13S


Den geniale Model 13S har enten ett eller tre rom, avhengig av hvordan du velger å bruke møblet. Hele møblets bredde kan brukes som en Soundbar løsning, eller du kan bruke møblet som tre individuelle avdelinger!

  • 3 bakplater
  • Kan brukes åpne eller med stoff/tredør
  • (Modell 13S kan ikke utstyres med skuffer)
  • Ytre mål: H: 205mm W: 1522mm D: 265mm
  • Indre mål: H: 162mm W: 482mm W: 1478mm
Produktnummer: I/A Kategori:

Model 13S has one cable hole center in the top plate and one cable hole in the bottom of the furniture. It can also be ordered with extra cable holes – or without cable holes – in the top plate.
The back plates are fitted 5 cm. from the back of the furniture. They are fitted with magnets and are removable. The back plates has cable holes, but can also be ordered without.
Model 13S can’t be fitted on alu stands or wheels. This model is made for wall mounting only.


All clic models, wood doors and drawers are available in the following paint and veneer quality’s:

White, black, grey and light grey paint
Oak and walnut veneer

The fabric doors are available in 2 series and a total of 16 colours:

Melange: coal, concrete, frost, coffee and latte.

Basic: dusty blue, grey, dark blue, olivegreen, brown, beige, white, silver, black, bordeaux and red.

We use a polyurethane paint on all items. This type of paint is both hard wearing and colorfast.

After the furniture is assembled, we paint it by hand for a perfect finish and sharp edges.


The clic furniture are fitted with a movable back plate that allows you to hide cables in the back of a furniture. When we produce the clic furniture we use a special technic that allows a very precise finish and also adds the possibility to have a movable back plate.
The back panels are magnet mounted 5 cm from the back of the furniture. Furthermore the clic furniture has an elegant cable opening in the top and bottom that makes it easy to run cables from one piece of furniture to another.

Alu covers

Clic’s special designed cable cover plates allows an elegant solution for cabling from the furniture. The cable cover plates are produced in aluminum or brass.
There are 4 types of cable cover plates and they fit in all clic models. All cable cover plates are available in silver, black or brass and are engraved with a discreet clic logo.

Alu stands

All clic models can be placed on the floor on the special made clic alu stands. Each stands are machined out of one piece of aluminum. You only need one set of alu stands for a clic furniture. If your clic model requires support stands, they will follow your order. All clic alu stands have adjustable feet to regulate the height. They are available in silver and black.

Wall bracket

With a clic wall bracket, you can mount you furniture on the wall. Our wall bracket allows you to mount your furniture tight up against the wall. They can be adjusted in level and pulls the furniture tight to the wall.
With the adjustment possibilities, we insure that your clic furniture are safely mounted on the wall.

FARGEGrå, Hvit, Sort, Trefarget, Valnøtt
Duet Audio AS
Skroll til toppen