Ortofon Cadenza Bronze
28.990kr
Dynamikk, snert og sødme i skjønn forening!
Tilgjengelighet Kun 2 på lager (kan også restbestilles)
Ortofon Cadenza Bronze
Ortofon Cadenza Bronze is a true high-end Moving-coil reference cartridge, conveying music with supreme precision, impact and dynamics.
Ortofon Cadenza Bronze stereo imaging capabilities illuminate the farthest corners of the soundstage in all three dimensions.
The Ortofon Cadenza Bronze model is using a Replicant 100 stylus and a conical aluminium cantilever.
The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire.
Field Stabilizing Element/FSE, is used for optimal linearity especially during complex crescendo passages.
“…Cadenza Bronze is an excellent tracking cartridge, and its ability to minimize surface noise will be an attribute that can be appreciated by any perspective owner…The Bronze certainly has the ability to extract all the fine detail contained in a recording, and excels at all the audiophile approved tasks. Performers are clearly defined, tonal balance is evenly reproduced, and dynamic contrasts are faithfully recreated. (Postive Feedback)
| FARGE | Oransje, Sort |
|---|---|
| TYPER | Moving Coil Pickup |
| SLIPING | Nude |
Spesifikasjoner
Output voltage at 1000 Hz, 5cm/sec. – 0,4 mV
Channel balance at 1 kHz – < 1 dB Channel separation at 1 kHz – > 24 dB
Channel separation at 15 kHz – > 20 dB
Frequency range at – 3dB – 20 – 55 kHz
Frequency response 20 Hz – 20 kHz – +/-1,5
Tracking ability at 315Hz at recommended tracking force *) – 80 µm
Compliance, dynamic, lateral – 12 µm/mN
Stylus type – Nude Ortofon Replicant on conical alu cantilever
Stylus tip radius – r/R 5/100 µm
Tracking force range – 2,2-2,7 g (22-27 mN)
Tracking force, recommended – 2,5 g (25 mN)
Tracking angle – 23°
Internal impedance, DC resistance – 5 Ohm
Recommended load impedance – 50-200 Ohm
Cartridge body material – Stainless steel / Aluminium
Cartridge colour – Bronze/Black
Cartridge weight – 10,7 gram