Ortofon MC Windfield Ti

49.990kr

MC Windfeld er designet av et team ledet av Mr. Windfelds etterfølger, Leif Johannsen, Ortofons chief officer for akustikk og teknologi. Pick-up’en bærer Mr. Windfelds navn – initialene hans «PW» er innskrevet i gull på pick-up side.

MC Windfeld Ti setter en ny standard innen analog reproduksjon. Denne pick-up´en lar deg oppleve et livlig, dynamisk og åpent lydbilde, med en overbevisende mellomtone. MC Windfeld Ti tar hensyn til alle små detaljer i musikken og presenterer det på en delikat måte.

Denne må virkelig oppleves! 

Ikke på lager, tilgjengelig som restordre

Varenummer: 5705796235135 Kategori:

Those who choose to adopt the MC Windfeld Ti will experience the lifelike, dynamic and open sound, with exceedingly clear midrange. The MC Windfeld Ti remains extremely musical while paying close attention to micro dynamic details, with its delicate, but also analytical nature.

The MC Windfeld Ti phono cartridge was introduced in 2017 as a continuous tribute to Ortofon’s former engineer Mr. Windfeld and optimization of the MC Windfeld model launched in 2008.

At the heart of the MC Windfeld Ti lies Selective Laser Melting technology, apllied for manufacturing of the Ortofon Exclusives Series cartridges.
The use of Titanium in the MC Windfeld Ti has provided a further improvement to the overall rigidity of the structure and the cartridge weight. Obviously, MC Windfeld Ti has gone to the next level by reducing unwanted vibrations and increasing the dynamic capability of the cartridge.


The mechanical integration of the MC Windfeld Ti

Historically, Ortofon has always followed its own path with regard to the mechanical design of the cartridge housing, because mechanical rigidity and total freedom from resonance in the audible range are a precondition for optimal sound quality.

In the MC Windfeld Ti the cartridge’s contact with the tonerarm takes place through three hard, well-defined contact points placed on the fastening section of the cartridge. This means that the mechanical integration of the cartridge and the tonearm arm are always absolutely perfect.

FARGESort, Sølv
TYPERMC
SLIPINGNude

Spesifikasjoner

Output voltage at 1000 Hz, 5cm/sec. – 0.2 mV
Channel balance at 1 kHz  –  0.5 dB
Channel separation at 1 kHz  –  25 dB
Channel separation at 15 kHz  –  20 dB
Frequency range at – 3dB  –  10 Hz – 50 kHz
Frequency response  –  20 Hz – 20 kHz +2 dB/- 1 dB
Tracking ability at 315Hz at recommended tracking force  –  90 µm
Compliance, dynamic, lateral  –  13 µm/mN
Stylus type  –  Special polished Nude Ortofon Replicant 100 on Boron Cantilever
Stylus tip radius  –  r/R 5/100 µm

Tracking force range  –  2.0-2.5 g (20-25 mN)
Tracking force, recommended  –  2.3 g (23 mN)
Tracking angle  –  23°
Internal impedance, DC resistance  –  7 Ohm
Recommended load impedance  –   > 10 Ohm
Coil wire material  –  Aucurum
Cartridge body material  –  SLM Titanium and Stainless Steel
Cartridge colour  –  Titanium/Black
Cartridge weight  –  11 g

Handlekurv
Rull til toppen