Technics SL-1200GR2

25.990kr

SL-1200GR2 er Technics´ første steg i en ny generasjon direktedrevne platespillere. Opplev en helt ny standard, med et rikt, robust lydbilde og utømmelig musikkglede.

  • Direktedrevet motor med stabil rotasjon
  • Ultralavt støynivå
  • ΔΣ-Drive: forhindrer vibrasjoner fra motoren og gir jevnere, mer nøyaktig rotasjon
  • To-lags tallerken med høy stivhet og vibrasjonsdemping
  • Også tilgjengelig i sort: SL-1210GR2

Bestillingsvare!

Produktnummer: SL-1200GR2ES Kategori:

En ny generasjon Technics

Siden oppfinnelsen av direktedrevne platespillere, har Technics jobbet aktivt med å forbedre lydkvaliteten på disse. De har nå utviklet ΔΣ-Drive, som kverker små vibrasjoner fra motoren og forbedrer den elektromagnetiske konverteringen. I første fase resulterer dette i SL-1200GR2.


ΔΣ-Drive (Delta Sigma Drive)

ΔΣ-Drive er et nyutviklet system som bruker Technics’ ekspertise innen PWM-signalbehandling. Dette reduserer vibrasjoner fra motoren, noe som gir jevnere, mer nøyaktig rotasjon, og derav en rik gjengivelse av musikken.


Pursuing Rigidity and VibrationDamping Characteristics

The platter achieves high rigidity and vibration damping characteristics by using a two-layer construction with deadening rubber applied to the entire rear surface of the aluminum die-cast to eliminate the unnecessary resonance that is otherwise relayed to the record, thereby producing clear sound.

To increase the inertial mass and reduce vibration, the shape of the aluminum die-cast portion was optimized by simulation. At 2.5 kg (including the rubber mat), the SL-1210GR2 platter is 0.8 kg heavier than that of the previous SL-1200MK5. Also, the back surface of the platter has strengthening ribs added to improve rigidity. Increasing the surface area of contact with the deadening rubber achieves damping characteristics that are more than twice those of the SL-1200MK5.


Current Injection Active Noise Cancelling

This technology combines a noise detection device with an error amplifier. It detects residual noise in the power supply and applies an inverse phase current to remove noise components. It removes low frequency noise more effectively than a regulator to ensure a more ideal power supply.

FARGESølv
TILBEHØRStøvdeksel
RIIA INNEBYGGETNei

Spesifikasjoner

Power Supply: AC 110-240 V, 60 Hz
Power Consumption: 11 W, Approx. 0.3 W (OFF)
Dimensions (W x H x D): 453 x 173 x 372 mm (17-27/32 × 6-13/16 × 14-21/32 inch)
Weight: Approx. 11.5 kg (Approx. 25.35lbs)
Accessories:  Turntable, Turntable sheet, Dust cover, EP record adaptor, Balance weight, Auxiliary weight, Cartridge spacer Head shell, Overhang gauge, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord, Owner’s Manual
Operating humidity range: 35% to 80% RH (no condensation)
Audio Output: PHONO (Pin Jack) x 1, EARTH TERMINAL x 1
Tonearm Section
Type: Static Balance
Effective Length: 230 mm (9-1/16″)
Overhang: 15 mm (19/32″)
Tracking Error Angle: Within 2° 32′ (at the outer groove of 30 cm record), Within 0° 32′ (at the inner groove of 30 cm record)
Offset Angle: 22°
Arm-height Adjustment Range: 0 – 6 mm
Stylus Pressure Adjustment Range: 0 – 4 g (Direct Reading)
Head Shell Weight: Approx. 7.6 g
Applicable Cartridge Weight Range: (without auxiliary weight) 5.6 – 12.0 g 14.3 – 20.7 g (including head shell) (with auxiliary weight) 10.0 – 16.4 g 18.7 – 25.1 g (including head shell)
Cartridge Mounting Dimension: 12.7 mm (1/2″) interval
Head Shell Terminal Lug: 1.2 mmφ 4-pin terminal lug
Type: Direct Drive Turntable
Motor: Brushless DC Motor
Turntable Speeds: 33-1/3, 45 and 78 r/min
Adjust Range: ±8 %, ±16 %
Starting Torque: 2.2 kg-cm
Build-up Characteristics: 0.7 s. from Standstill to 33-1/3 r/min
Braking System: Electronic Brake
Wow And Flutter: 0.025 % W.R.M.S.
Rumble: 78 dB (IEC 98A weighted)
Turntable Platter: Aluminum diecast,Diameter : 332 mm, Weight : Approx. 2.5 kg (5.51 lb) (Including rubber sheet)
Handlekurv
Duet Audio AS
Skroll til toppen