Trinnov Amplitude 8m

Name: Trinnov Amplitude 8m
SKU: AMP8M
Price: 112990 NOK
Availability: BackOrder

112.990kr

Ikke på lager, tilgjengelig som restordre

Produktnr: AMP8M Kategori: Multikanalsforsterkere

Trinnov

A perfect companion to our Altitude16 and made with the most demanding users in mind, our new 8 channel amplifier brings intelligent power and pristine audio quality at a sensitive price point without any compromise in terms of design and build quality.

THE INDUSTRY’S LOWEST-DISTORTION AND NOISE SPECIFICATIONS

The importance of this trait cannot be over-estimated in a theater that may have twenty or thirty speakers in a single room. If each of those speakers were producing even a small amount of noise, it would rapidly become noticeable and unacceptable. This scenario never arises with The Amplitude8m.

INTELLIGENT POWER

Our amplifiers use microprocessor control for turn-on delay and feature an automatic AC power recognition and configuration system. The amplifiers not only recognize whether they are hooked up to 117V or 230V nominal power, they automatically self-configure.

SLEEP CIRCUIT

The Amplitude8m incorporate a new “sleep” circuit. When the amplifier stays idle for a period of more than 10 minutes, power is removed from the output modules and a front-panel LED begins to flash. As soon as an input signal is detected again on any channel, normal playback operation resumes instantaneously.

FARGE	Sort
ANTALL KANALER	8.0
INNGANGER	XLR balansert

Spesifikasjoner

AUDIO SPECIFICATIONS

Crosstalk: lower than -90dB.
Gain: 19dB – Test window is 18.6 to 19.6dB, center is 19.1dB.
Frequency response: +0 , -0.5dB 20-20kHz
Power Output: 200 Watts RMS x 8 20-20kHz 0.05% THD+N 8Ω. 300W X4 into 4Ω.

INTELLIGENT POWER

Microprocessor: control for turn-on delay
Automatic: AC Voltage recognition and configuration
200 RMS/Channel: @ 8Ω on 8 Ch and 300 RMS/Channel @ 4Ω on any 4 Ch
Hypex N-Core: NC-500 Class D amplifier modules

PRISTINE DYNAMIC RENDERING

Intermodulation Distortion: Less than 0.05%
Signal to noise ratio: -120 dB referenced to rated output.
Frequency Response +0, -.5 dB, 5 Hz to 20kHz, load independent

POWER SPECIFICATIONS

Power Requirement: min/max VAC / fuse: 117V AC (100V-132V) or 230V (200V-260V); 50/60 Hz Automatically selects proper voltage – 20 Amp fuse for 120V, 12.5 Amp fuse for 230V.
Power Consumption: standby / idle /fully loaded: Less than 0.5W Standby. 80W Idle. 40W Sleep (no audio for 10 minutes). Full power (1kHz into 8ohms @ 200W) 2500VA, 2000W.